PRECAUTION
REMOVE ENGINE WITH TRANSMISSION
REMOVE MOTOR CABLE
CAUTION:
Be sure to wear insulated gloves before removing the motor cable.
Note
Cover the holes where the cable was connected with tape or equivalent (non-residue type) to prevent entry of foreign objects or water.
When removing the motor cable, minimize bending of the transmission end of the cable.
for RHD:
Remove the 3 motor cable clamps.
for LHD:
Remove the 2 motor cable clamps.
Using an insulated tool, remove the 2 bolts and connector cover.
Using a screwdriver, remove the 3 terminal caps.
Using a 5 mm hexagon wrench, remove the 3 bolts.
Using an insulated tool, remove the 2 bolts.
*1 | Protective Tape |
Using a screwdriver, disconnect the 3 terminal cables and remove the motor cable from the hybrid vehicle transmission assembly.
Tech Tips
Tape the screwdriver tip before use.
Remove the 3 O-rings from the 3 terminal cables.
*A | for LHD |
*B | for RHD |
Remove the 4 clamps from the motor cable.
Note
Before removing the clamp, put matchmarks on the cables.