CHECK AUTO OPERATION
Note
Make sure that initialization is completed before inspection Click here.
Tech Tips
When pressing the switch for 0.3 seconds or less, the roof sunshade moves but auto operation does not operate.
Turn the power switch on (IG).
When the roof sunshade is fully closed, press the OPEN switch for 0.3 seconds or more. Check that the roof sunshade automatically slides until it is fully opened.
When the roof sunshade is fully open, press the CLOSE switch for 0.3 seconds or more. Check that the roof sunshade automatically slides until it is fully closed.
When the auto operation is operating, check that pressing any roof sunshade switch stops the roof sunshade operation.
CHECK JAM PROTECTION FUNCTION
CAUTION:
Do not use a part of your body, for example, your hand, to check the jam protection function.
Do not allow anything to become caught in the sliding roof by accident in this procedure.
Perform the inspection from the inside of the vehicle.
Note
Do not use hard objects, such as a hammer, to avoid damaging the roof.
Make sure that initialization is completed before inspection Click here.
If the jam protection function does not operate, reset the roof sunshade ECU (sliding roof drive gear sub-assembly).
When the slide close function is operating and an object is caught between the vehicle body and roof sunshade, check that the roof sunshade opens a distance of 218 mm (8.58 in.) from the point of contact with the object, or opens fully if an opening distance of 218 mm (8.58 in.) is not available.