REMOVE FRONT DOOR SCUFF PLATE RH
Tech Tips
Use the same procedure for the RH side and the LH side Click here.
REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
Tech Tips
Use the same procedure for the RH side and the LH side Click here.
REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Disengage the 3 claws.
Disengage the 2 guides and remove the No. 2 instrument panel under cover sub-assembly.
REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY
Remove the 2 bolts <B> and 3 screws <F>.
Disengage the 4 claws and 3 clips.
Disconnect each connector and clamp, and remove the lower instrument panel sub-assembly.
REMOVE ECM
Separate the harness connector (LHD).
Disconnect the 5 ECM connectors.
Remove the wire harness clamp.
Remove the 2 nuts, bolt and ECM.
REMOVE NO. 1 ECM BRACKET
Remove the 2 screws and No. 1 ECM bracket.
REMOVE NO. 2 ECM BRACKET
Remove the 2 screws and No. 2 ECM bracket.