POWER WINDOW CONTROL SYSTEM OPERATION CHECK


  1. CHECK WINDOW LOCK SWITCH

    A01JCS2

    Tech Tips

    Before performing the window lock switch operation check, make sure that the window lock switch is off (the switch is not pushed in).


    1. Check that the front passenger and rear windows cannot be operated from each power window regulator switch assembly (front passenger side, rear LH side or rear RH side) when the window lock switch of the multiplex network master switch assembly is pushed in.

    2. Check that the front passenger and rear windows can be operated from each power window regulator switch assembly (front passenger side, rear LH side or rear RH side) when the window lock switch of the multiplex network master switch assembly is pushed in again to release it.

    3. CHECK MANUAL UP / DOWN FUNCTION


      1. Check that the driver door power window operates as follows:

    4. OK
      Condition Master Switch Switch Operation Power Window
      Power switch on (IG) Driver side Pulled halfway up UP (Closes)
      Pushed halfway down DOWN (Opens)
  2. Check that the front passenger side window and rear power windows operate as follows:

    OK
    Condition Regulator Switch Switch Operation Power Window

    • Power switch on (IG)

    • Window lock switch off

    Front passenger side Pulled halfway up UP (Closes)
    Pushed halfway down DOWN (Opens)
    Rear LH side Pulled halfway up UP (Closes)
    Pushed halfway down DOWN (Opens)
    Rear RH side Pulled halfway up UP (Closes)
    Pushed halfway down DOWN (Opens)
  • CHECK AUTO UP / DOWN FUNCTION


    1. Check that the driver door power window operates as follows:

      OK
      Condition Master Switch Switch Operation Power Window
      Power switch on (IG) Driver side Pulled up (One touch operation) AUTO UP (Closes)
      Pushed down (One touch operation) AUTO DOWN (Opens)
    2. Check that the front passenger side window and rear power windows operate as follows:

      OK
      Condition Regulator Switch Switch Operation Power Window

      • Power switch on (IG)

      • Window lock switch off

      Front passenger side Pulled up (One touch operation) AUTO UP (Closes)
      Pushed down (One touch operation) AUTO DOWN (Opens)
      Rear LH side Pulled up (One touch operation) AUTO UP (Closes)
      Pushed down (One touch operation) AUTO DOWN (Opens)
      Rear RH side Pulled up (One touch operation) AUTO UP (Closes)
      Pushed down (One touch operation) AUTO DOWN (Opens)
  • CHECK REMOTE MANUAL UP / DOWN FUNCTION


    1. Check that the front passenger side window and rear power windows operate as follows:

      OK
      Condition Master Switch Switch Operation Power Window

      • Power switch on (IG)

      • Window lock switch off

      Front passenger side Pulled halfway up UP (Closes)
      Pushed halfway down DOWN (Opens)
      Rear LH side Pulled halfway up UP (Closes)
      Pushed halfway down DOWN (Opens)
      Rear RH side Pulled halfway up UP (Closes)
      Pushed halfway down DOWN (Opens)
  • CHECK REMOTE AUTO UP / DOWN FUNCTION


    1. Check that the front passenger side window and rear power windows operate as follows:

      OK
      Condition Master Switch Switch Operation Power Window

      • Power switch on (IG)

      • Window lock switch off

      Front passenger side Pulled up (One touch operation) AUTO UP (Closes)
      Pushed down (One touch operation) AUTO DOWN (Opens)
      Rear LH side Pulled up (One touch operation) AUTO UP (Closes)
      Pushed down (One touch operation) AUTO DOWN (Opens)
      Rear RH side Pulled up (One touch operation) AUTO UP (Closes)
      Pushed down (One touch operation) AUTO DOWN (Opens)
  • CHECK POWER WINDOW OPERATION FUNCTION AFTER POWER SWITCH IS TURNED OFF


    1. Check that all the power windows can be operated with the multiplex network master switch assembly and power window regulator switch assemblies (for front passenger, rear LH and RH sides) after the power switch is turned off.

      Tech Tips

      If the window lock switch is on, the windows cannot be operated using the power window regulator switch assemblies (for front passenger, rear LH and RH sides). Therefore, turn the window lock switch off before checking the window operation.

    2. Check that the key-off operation function does not operate after the driver door or front passenger door is opened.

      Tech Tips

      Even if the driver door or front passenger door is opened during automatic window operation while the key-off operation function is on, the window will continue operating.

    3. Check that all the power windows cannot be operated after more than approximately 45 seconds have elapsed since the power switch was turned off.

  • CHECK JAM PROTECTION FUNCTION


    1. Check the basic function.

      CAUTION:

      Do not put your fingers between the door frame and door glass to check the jam protection function. Also, prevent any part of your body from being caught during inspection.

      Tech Tips

      The jam protection function is operative during both the auto up and manual up operations.


      1. Fully open the window.

      2. A01J9CHE02
        *1 Thick Book
        *2 Cloth

        Set a thick book wrapped with a piece of cloth near the window fully closed position.

      3. Operate the auto up or manual up function to check that the power window goes down after the book is caught between the window and door frame, and stops when the opening reaches approximately 200 mm (7.87 in.).

        Tech Tips

        The power window moves down approximately 125 mm (4.93 in.). However, when the opening does not reach 200 mm (7.87 in.), the power window continues to go down until the opening reaches 200 mm (7.87 in.) or until approximately 5 seconds elapse.

      4. While the power window is moving down, check that the door glass cannot be raised when the power window switch is used.

  • CHECK POWER WINDOW SWITCH LED ILLUMINATION


    1. A01J9LLE01
      *1 LED

      Check the LED illumination (multiplex network master switch assembly).


      1. Check that the LEDs located on the multiplex network master switch assembly illuminate when the power switch is turned on (IG).

        A01JAG4E01
    2. A01JBHTE01
      *1 LED

      Check the LED illumination (power window regulator switch assembly).


      1. Check that the LEDs located on the power window regulator switch assembly illuminate when the power switch is turned on (IG).

        A01JAG4E01