INSPECTION PROCEDURE
Tech Tips
If an outlet of the air conditioning system is facing the microphone, noise may be recorded and other caller may not be able to hear your voice properly.
PROCEDURE
CHECK CELLULAR PHONE
Check if the other caller can hear your voice properly.
OK |
---|
Your voice can be heard properly. |
Tech Tips
The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.
NG |
REPLACE CELLULAR PHONE |
OK |
CHECK SETTINGS
*a | Example |
Display the "Call" screen.
Check that the "Mute" switch is not set to on.
OK |
---|
"Mute" switch is not set to on. |
NG |
TURN "Mute" SWITCH OFF |
OK |
CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)
Enter the "Microphone & Voice Recognition Check" screen. Refer to Check Mic & Voice Recognition in Operation Check Click here.
When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
OK |
---|
Check result is normal. |
NG |
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here |
OK |
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here