ECM REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    A01DY2GE01
    Text in Illustration
    *1 Stopper

    1. Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.

    2. A01DZ7ME01
      Text in Illustration
      *1 Hinge

      Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.

  3. REMOVE 4WD CONTROL ECU (w/ A.D.D.)

    A01E0FK

    1. Disconnect the connector.

    2. Remove the bolt and control ECU.

  4. REMOVE TURBO MOTOR DRIVER

    A01DYX9

    1. Disconnect the connector.

    2. Remove the bolt and turbo motor driver.

  5. REMOVE TRANSMISSION CONTROL ECU ASSEMBLY (for Automatic Transmission)

    A01E2BE

    1. Disconnect the 3 connectors.

    2. Remove the 2 bolts and TCM.

  6. REMOVE ECM

    A01DX14

    1. Disconnect the 4 connectors.

    2. Remove the bolt, 2 nuts and ECM.

  7. REMOVE NO. 1 ECM BRACKET

    A01DY46E01

    1. Remove the 3 screws and bracket.

  8. REMOVE NO. 2 ECM BRACKET

    A01DZ30E01

    1. Remove the 2 screws and bracket.