DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag activation.
REMOVE NO. 2 AIR CLEANER PIPE SUB-ASSEMBLY
Disconnect the manifold absolute pressure sensor connector.
Disconnect the vacuum hose from the gas filter.
Loosen the 2 clamps.
Remove the bolt and disconnect the pipe together with the 2 air hoses.
REMOVE VACUUM SWITCHING VALVE BRACKET
Remove the 2 bolts and bracket.
REMOVE DIESEL THROTTLE BODY ASSEMBLY
Disconnect the 2 connectors.
Remove the 2 bolts, 2 nuts, throttle body and gasket.
REMOVE THROTTLE BODY BRACKET
Remove the 3 bolts and bracket.
REMOVE INTAKE AIR CONNECTOR
Remove the 2 nuts, bolt, air connector and bracket.
REMOVE NO. 1 GLOW PLUG CONNECTOR
Remove the nut and wire harness.
Remove the 4 screw grommets, 4 nuts and glow plug connector.
REMOVE GLOW PLUG ASSEMBLY
Using a 12 mm deep socket wrench, remove the 4 glow plugs.