INSPECT NO. 1 INTEGRATION RELAY (C/OPN)
*a | Component without harness connected (No. 1 Integration Relay) |
Measure the resistance according to the value(s) in the table below.
Standard Resistance | ||||||||
---|---|---|---|---|---|---|---|---|
|
If the result is not as specified, replace the No. 1 integration relay.
INSPECT NO. 1 INTEGRATION RELAY (EFI)
Check the EFI NO. 1 fuse.
Measure the resistance according to the value(s) in the table below.
Standard Resistance | ||||||
---|---|---|---|---|---|---|
|
If the result is not as specified, replace the EFI NO. 1 fuse.
*a | Component without harness connected (No. 1 Integration Relay) |
Check the EFI relay.
Measure the resistance according to the value(s) in the table below.
Standard Resistance | ||||||||
---|---|---|---|---|---|---|---|---|
|
If the result is not as specified, replace the No. 1 integration relay.
INSPECT NO. 1 INTEGRATION RELAY (INJ)
*a | Component without harness connected (No. 1 Integration Relay) |
Measure the resistance according to the value(s) in the table below.
Standard Resistance | ||||||||
---|---|---|---|---|---|---|---|---|
|
If the result is not as specified, replace the No. 1 integration relay.
INSPECT NO. 1 INTEGRATION RELAY (A/F)
*a | Component without harness connected (No. 1 Integration Relay) |
Measure the resistance according to the value(s) in the table below.
Standard Resistance | ||||||||
---|---|---|---|---|---|---|---|---|
|
If the result is not as specified, replace the No. 1 integration relay.