PRECAUTION
Note
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE STARTER ASSEMBLY
Detach the wire harness clamp from the wire harness bracket.
Remove the bolt and wire harness bracket.
Remove the bolt and disconnect the wire harness.
Disconnect the starter connector.
Remove the terminal cap.
Remove the nut and disconnect the wire harness.
Remove the 2 bolts and starter assembly.