CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function(s) can be customized.
Be sure to make notes of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Power Window / Utility / Customize Setting.
Select the setting by referring to the table below.
Tester Display | Default | Content | Setting |
---|---|---|---|
Door Key Linked P/W Up | ON | Function that raises all power windows when, with engine switch off, key is used to hold driver door key cylinder to lock position for more than 1.5 seconds | ON/OFF |
Door Key Linked P/W Down | ON | Function that lowers all power windows when, with engine switch off, key is used to hold driver door key cylinder to unlock position for more than 1.5 seconds | ON/OFF |
P/W Up w/Transmitter | ON | Function that raises all power windows when, with engine switch off, lock switch on transmitter is pressed and held for more than 3.0 seconds | ON/OFF |
P/W Down w/ Transmitter | ON | Function that lowers all power windows when, with engine switch off, unlock switch on transmitter is pressed and held for more than 3.0 seconds | ON/OFF |
P/W Up w/Smart | ON | Function that raises all power windows when, with engine switch off, entry lock switch on driver side door outer handle is pressed and held for more than 3.0 seconds | ON/OFF |