ECM (w/ Dual VVT-i) REMOVAL


  1. REMOVE BATTERY SERVICE HOLE COVER

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT DOOR SCUFF PLATE RH

  4. REMOVE FRONT SEAT ASSEMBLY RH

    Click here

  5. REMOVE ECM


    1. Fold back the floor carpet.

    2. A003F4M

      Remove the 3 bolts from the ECM.

    3. A003H0IE01
      Text in Illustration
      *a Push
      *b Lock

      Raise the 2 levers while pushing the locks on the 2 levers, disconnect the 2 ECM connectors and remove the ECM.

      Note

      After disconnecting the ECM connector, make sure that dirt, water and other foreign matter does not contact the ECM connector.

  6. REMOVE NO. 1 ECM BRACKET


    1. A003DW9

      Remove the 3 screws and No. 1 ECM bracket.

  7. REMOVE NO. 2 ECM BRACKET


    1. A003CR8

      Remove the 2 screws and No. 2 ECM bracket.