REMOVE BATTERY SERVICE HOLE COVER
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE FRONT DOOR SCUFF PLATE RH
REMOVE FRONT SEAT ASSEMBLY RH
REMOVE ECM
Fold back the floor carpet.
Remove the 3 bolts from the ECM.
*a | Push |
*b | Lock |
Raise the 2 levers while pushing the locks on the 2 levers, disconnect the 2 ECM connectors and remove the ECM.
Note
After disconnecting the ECM connector, make sure that dirt, water and other foreign matter does not contact the ECM connector.
REMOVE NO. 1 ECM BRACKET
Remove the 3 screws and No. 1 ECM bracket.
REMOVE NO. 2 ECM BRACKET
Remove the 2 screws and No. 2 ECM bracket.