ECM REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE FRONT DOOR SCUFF PLATE RH

  3. REMOVE FRONT SEAT ASSEMBLY RH (for Hi-back Seat Type)

    Tech Tips

    Use the same procedures described for the LH side. Click here

  4. REMOVE FRONT SEAT ASSEMBLY RH (for Low-back Seat Type)

    Tech Tips

    Use the same procedures described for the LH side. Click here

  5. REMOVE ECM


    1. Fold back the floor carpet.

    2. A003I8L

      Remove the 3 bolts from the ECM.

    3. A003B1EE01

      Detach the 2 wire harness clamps from the No. 1 ECM bracket and No. 2 ECM bracket.

    4. Raise the 2 levers while pushing the locks on the 2 levers, disconnect the 2 ECM connectors and remove the ECM.

      Text in Illustration
      *a Push
      *b Lock

      Note

      After disconnecting a ECM connector, make sure that dirt, water and other foreign matter does not contact the ECM connector.

  6. REMOVE NO. 1 ECM BRACKET


    1. A003FDU

      Remove the 3 screws and No. 1 ECM bracket.

  7. REMOVE NO. 2 ECM BRACKET


    1. A003BSZ

      Remove the 2 screws and No. 2 ECM bracket.