REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG
Using a moulding remover, disengage the 3 claws and remove the front door inside handle bezel plug as shown in the illustration.
REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)
Using a moulding remover, disengage the 2 clips and 5 claws as shown in the illustration.
Disconnect the connector and remove the power window regulator master switch assembly with front door armrest base panel.
REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)
Using a moulding remover, disengage the 2 clips and 5 claws.
Disconnect the connector and remove the power window regulator switch assembly with front door armrest base panel.
REMOVE DOOR ARMREST COVER
Remove the door armrest cover.
REMOVE COURTESY LIGHT ASSEMBLY
Using a screwdriver wrapped with protective tape, disengage the claw.
Disconnect the connector and remove the courtesy light assembly.
REMOVE NO. 1 FRONT DOOR STIFFENER CUSHION
Remove the screw and No. 1 front door stiffener cushion.
REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY
Remove the 3 screws.
Using a clip remover, disengage the 10 clips and front door trim board retainer.
*1 | Front Door Trim Board Retainer |
Pull out the front door trim board sub-assembly in the direction indicated by the arrow as shown in the illustration.
Raise the front door trim board sub-assembly to disengage the 4 claws and remove the front door trim board sub-assembly together with the front door inner glass weatherstrip.
Disconnect each connector.
Disconnect the front door lock remote control cable assembly and front door inside locking cable assembly.
Remove the front door trim board retainer (green) from the front door trim board sub-assembly.
REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP
Using a moulding remover, disengage the 4 claws and remove the front door inner glass weatherstrip from the front door trim board sub-assembly as shown in the illustration.
REMOVE SEAT MEMORY SWITCH
Remove the 2 screws and seat memory switch.