If a DTC is displayed during the DTC check, check the circuit listed in the table below and proceed to the page given.
Tech Tips
*1: "Comes on" means that the MIL will illuminate.
*2: "DTC stored" means that the ECM memorizes the malfunction code if the DTC detection condition(s) are met.
These DTCs may be output when the clutch, brake, gear components, etc. inside the automatic transmission are damaged.
DTC Code | Detection Item | MIL*1 | Memory*2 | See page |
---|---|---|---|---|
P0500/42 | Vehicle Speed Sensor Malfunction | Comes on | DTC stored | |
P0560/96 | System Voltage | Comes on | DTC stored | |
P0705/C2 | Transmission Range Sensor Circuit Malfunction (PRNDL Input) | Comes on | DTC stored | |
P0710/38 | Transmission Fluid Temperature Sensor "A" Circuit | Comes on | DTC stored | |
P0712/38 | Transmission Fluid Temperature Sensor "A" Circuit Low Input | Comes on | DTC stored | |
P0713/38 | Transmission Fluid Temperature Sensor "A" Circuit High Input | Comes on | DTC stored | |
P0717/67 | Input Speed Sensor Circuit No Signal | Comes on | DTC stored | |
P0722/61 | Output Speed Sensor Circuit No Signal | Comes on | DTC stored | |
P0724/95 | Brake Switch "B" Circuit High | Comes on | DTC stored | |
P0973/62 | Shift Solenoid "A" Control Circuit Low (Shift Solenoid Valve S1) | Comes on | DTC stored | |
P0974/62 | Shift Solenoid "A" Control Circuit High (Shift Solenoid Valve S1) | Comes on | DTC stored | |
P0976/63 | Shift Solenoid "B" Control Circuit Low (Shift Solenoid Valve S2) | Comes on | DTC stored | |
P0977/63 | Shift Solenoid "B" Control Circuit High (Shift Solenoid Valve S2) | Comes on | DTC stored | |
P2716/77 | Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT) | - | DTC stored | |
P2769/64 | Short in Torque Converter Clutch Solenoid Circuit (Shift Solenoid Valve SL) | - | DTC stored | |
P2770/64 | Open in Torque Converter Clutch Solenoid Circuit (Shift Solenoid Valve SL) | - | DTC stored | |
U0100/A2 | Lost Communication with ECM/PCM "A" | Comes on | DTC stored |