REMOVE INSTRUMENT SIDE PANEL LH
*1 | Protective Tape |
Apply protective tape as shown in the illustration.
Using moulding remover D, detach the 6 clips and remove the instrument side panel LH.
REMOVE INSTRUMENT PANEL ORNAMENT
*1 | Protective Tape |
Apply protective tape as shown in the illustration.
Using moulding remover B, detach the 4 clips and remove the instrument panel ornament.
Disconnect the connector.
REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
*1 | Protective Tape |
Using a screwdriver, detach the claw and remove the switch base hole cover from the No. 1 instrument panel safety pad sub-assembly.
Tech Tips
Tape the screwdriver tip before use.
Remove the bolt.
Remove the screw <C>.
Detach the 5 clips and claw and remove the No. 1 instrument panel safety pad sub-assembly.
Disconnect each connector.
REMOVE OUTER MIRROR SWITCH ASSEMBLY
Using a screwdriver, detach the 4 claws and remove the outer mirror switch assembly.
Tech Tips
Tape the screwdriver tip before use.