REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH NO. 2
Using a moulding remover D, detach the 3 claws and remove the instrument cluster finish panel garnish No. 2.
REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER
for Standard Body:
Using a moulding remover D, detach the 4 claws in the order shown in the illustration.
for Wide Body:
Using a moulding remover D, detach the 5 claws in the order shown in the illustration.
*A | for Standard Body | *B | for Wide Body |
*1 | Protective Tape |
Apply protective tape as shown in the illustration.
Using a moulding remover D, detach the claw.
Detach the claw as shown in the illustration.
Detach the 3 claws as shown in the illustration.
Detach the 2 claws as shown in the illustration.
for Standard Body:
Detach the 3 claws and remove the instrument cluster finish panel sub-assembly center.
for Wide Body:
Detach the 4 claws and remove the instrument cluster finish panel sub-assembly center.
*A | for Standard Body | *B | for Wide Body |
REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH NO. 1
Using a moulding remover D, detach the 3 claws and remove the instrument cluster finish panel garnish No. 1.
REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
Using a moulding remover D, detach the 4 claws and remove the instrument cluster finish panel assembly.
REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Detach the 6 claws and 4 hooks and remove the instrument cluster finish panel sub-assembly.
REMOVE COMBINATION METER ASSEMBLY
Remove the 2 screws.
Detach the 2 claws and remove the combination meter assembly.
Disconnect the 2 connectors and detach the wire harness clamp.