DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
Note
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE REAR CONSOLE BOX SUB-ASSEMBLY
for Automatic Transmission:
for Manual Transmission:
w/ Refrigerated Cool Box:
for Bench Seat Type:
REMOVE FRONT SEAT ASSEMBLY (for Bench Seat Type)
REMOVE CENTER FLOOR CARPET ASSEMBLY (for Bench Seat Type)
Remove the 4 bolts and center floor carpet assembly.
REMOVE YAW RATE AND ACCELERATION SENSOR
Remove the 2 bolts and yaw rate and acceleration sensor.
*A | for Automatic Transmission | *B | for Manual Transmission |
Disconnect the connector.
for Automatic Transmission:
Detach the clamp from the sensor bracket.