REMOVE FRONT BUMPER COVER
Remove the front bumper cover Click here.
REMOVE RADIATOR SUPPORT ABSORBER UPPER
Disengage the 7 claws and remove the radiator support absorber.
REMOVE FRONT BUMPER ENERGY ABSORBER
Remove the front bumper energy absorber.
REMOVE NO. 2 RADIATOR SIDE AIR SEAL
Disengage the 2 claws and remove the radiator side air seal.
REMOVE NO. 1 RADIATOR SIDE AIR SEAL
Tech Tips
Use the same procedure as for the No. 1 side.
REMOVE RADIATOR SUPPORT EXTENSION LH
Disengage the 2 claws and remove the radiator support extension.
REMOVE RADIATOR SUPPORT EXTENSION RH
Tech Tips
Use the same procedure as for the LH side.
REMOVE WINDSHIELD WASHER JAR ASSEMBLY
Remove the 2 bolts.
Disengage the claw.
Disengage the guide and remove the windshield washer jar.
Disconnect the washer hose.
Disconnect the connectors.
REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
Disengage the 5 clamps and disconnect the wire harness.
Remove the 8 bolts.
Disengage the 2 guides and remove the front bumper reinforcement.
REMOVE AIR CLEANER CAP SUB-ASSEMBLY
*1 | Clamp |
*2 | Guide |
Loosen the hose clamp and disconnect the air cleaner hose.
Disengage the 2 clamps and 2 guides and remove the air cleaner cap.
REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
Remove the air cleaner filter element.
REMOVE HIGH PITCHED HORN ASSEMBLY
Disconnect the connector.
Remove the bolt and high pitched horn assembly.
REMOVE NO. 1 RADIATOR LOWER AIR DEFLECTOR
Remove the 2 clips.
Remove the 2 guides and radiator air deflector.
REMOVE NO. 1 AIR CLEANER INLET
Disengage the 2 claws and remove the No. 1 air cleaner inlet.
REMOVE ECM
Pull up the lever to loosen the lock and remove the 2 connectors from the ECM.
Separate the wire harness from the ECU bracket.
Remove the 5 bolts and the ECM.
REMOVE ECU BRACKET
Remove the 2 screws and the ECU bracket.