REMOVE LUGGAGE COMPARTMENT FLOOR MAT
Remove the luggage compartment floor mat.
REMOVE LUGGAGE COMPARTMENT TRIM COVER LH
Remove the luggage compartment trim cover LH.
PRECAUTION
Note
After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.
DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE ENGINE ROOM SIDE COVER
Remove the 4 clips and engine room side cover.
REMOVE COOL AIR INTAKE DUCT SEAL
Remove the 7 clips and cool air intake duct seal.
REMOVE ECM
Disconnect the 2 ECM connectors and wire harness clamp.
Push in the locks on the 2 levers, raise the levers, and disconnect the 2 ECM connectors.
Note
After disconnecting the connectors, make sure that dirt, water or other foreign matter does not contact the connecting part of the connectors.
for LHD:
Disconnect the clamp.
for RHD:
Disconnect the 2 clamps.
Remove the 2 nuts and ECM.
REMOVE ECM BRACKET
Remove the 2 bolts and ECM bracket.
REMOVE NO. 2 ECM BRACKET
Remove the 2 bolts and No. 2 ECM bracket.
REMOVE ENGINE ROOM ECU COVER
Disconnect the 3 claws and engine room ECU cover.
REMOVE ENGINE ROOM ECU BOX