TEMPORARILY INSTALL FRONT PROPELLER SHAFT ASSEMBLY
Completely remove any oil or the like and clean the constant velocity universal joint washers and the contact surfaces of the front propeller shaft assembly, transfer and front differential.
*a | Matchmark |
Align the matchmarks on the differential companion flange and front propeller shaft.
Temporarily install the front propeller shaft with 6 new bolts and the 2 universal joint washers.
*a | Matchmark |
Align the matchmarks on the transfer companion flange and front propeller shaft.
Temporarily install the front propeller shaft with 6 new bolts and the 2 universal joint washers.
INSTALL REAR ENGINE MOUNTING MEMBER
Set the rear No. 3 engine mounting insulator to the rear engine mounting member.
Temporarily install the rear engine mounting member to the automatic transmission assembly with the 5 nuts.
Install the rear engine mounting member with the 4 bolts.
Tighten the 5 nuts.
TIGHTEN FRONT PROPELLER SHAFT ASSEMBLY
Using a 6 mm socket hexagon wrench, tighten the front propeller shaft with the 6 bolts.
Note
Be careful not to damage the front propeller shaft.
Using a 6 mm socket hexagon wrench, tighten the front propeller shaft with the 6 bolts.
Note
Be careful not to damage the front propeller shaft.
INSTALL FRONT EXHAUST PIPE ASSEMBLY
INSPECT FOR EXHAUST GAS LEAK