INSPECTION PROCEDURE
PROCEDURE
CHECK IF A PROPER CD IS INSERTED
Make sure that the CD is an audio CD or a CD with an MP3 WMA or ACC file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.
OK |
---|
The CD is normal. |
Tech Tips
Translucent or uniquely-shaped CDs cannot be played.
CDs with adhesive paper labels should not be played.
Commercial audio CDs can be played.
CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.
MP3, WMA and ACC files on CD-ROMs, CD-Rs and CDRWs can be played.
For details on playable CDs, refer to the Owner's Manual.
NG |
CHANGE CD |
OK |
CHECK THAT CD IS INSERTED PROPERLY
Check whether or not the CD is inserted upside down.
OK |
---|
CD is properly inserted. |
NG |
SET CD PROPERLY |
OK |
CLEAN CD AND RECHECK
Check for dirt on the CD surface.
OK |
---|
Dirt is on the CD surface. |
Note
Do not use a conventional record cleaner or antistatic preservative.
Tech Tips
If the CD is dirty, clean the CD by wiping the CD surface radially with a soft cloth.
NG |
REPLACE CD AND RECHECK Click here |
OK |
END (CD IS DIRTY)
REPLACE CD AND RECHECK
Replace the CD with a normal one and check that the same trouble does not occur.
OK |
---|
Same trouble does not occur. |
NG |
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here |
OK |
END (CD IS DEFECTIVE)