Do not try to remove the nylon tube as it is welded to the fuel suction with pump and gauge tube assembly (Click here).
REMOVE FUEL SENDER GAUGE ASSEMBLY
Disconnect the fuel pump harness connector and fuel sender gauge connector.
Press down on the fuel sender gauge claw labeled A. Then slide the fuel sender gauge assembly upward to remove it.
Press down | |
Slide |
REMOVE NO. 1 FUEL SUB-TANK
Disconnect the jet pump from the No. 1 fuel sub-tank.
*1 | Jet Pump |
Detach the claw and 2 clamps from the No. 1 fuel sub-tank.
Do not damage the No. 1 fuel sub-tank.
Using a screwdriver with its tip wrapped in protective tape, detach the 5 claws to remove the No. 1 fuel sub-tank.
Do not damage the No. 1 fuel sub-tank.
REMOVE FUEL PUMP
Using a screwdriver with its tip wrapped in protective tape, detach the 5 claws to remove the fuel pump from the fuel filter assembly.
Do not damage the fuel filter assembly.
Disconnect the fuel pump harness connector from the fuel pump.
Remove the O-ring from the fuel filter assembly.
Remove the fuel pump spacer from the fuel pump.