REMOVE BATTERY SERVICE HOLE COVER
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE FRONT DOOR SCUFF PLATE RH
REMOVE FRONT SEAT ASSEMBLY RH
for Hi-back Seat Type (Click here)
for Low-back Seat Type (Click here)
for Split Bench Seat Type (Click here)
REMOVE ECM
Fold back the floor carpet.
Remove the 3 bolts and disconnect the ECM.
Detach the 2 wire harness clamps from the No. 1 ECM bracket and No. 2 ECM bracket.
*a | Push |
*b | Lock |
Disconnect the 2 ECM connectors and remove the ECM.
After disconnecting a ECM connector, make sure that dirt, water and other foreign matter does not contact the ECM connector.
Raise the 2 levers while pushing the locks on the 2 levers and disconnect the 2 ECM connectors.
Remove the ECM.
REMOVE NO. 1 ECM BRACKET
Remove the 3 screws and No. 1 ECM bracket.
REMOVE NO. 2 ECM BRACKET
Remove the 2 screws and No. 2 ECM bracket.