VEHICLE STABILITY CONTROL SYSTEM DTC CHECK / CLEAR


  1. DTC CHECK/CLEAR (When Using GTS)


    1. Check the DTC.


      1. Turn the ignition switch off.

      2. Connect the GTS to the DLC3.

      3. Turn the ignition switch to ON.

      4. Turn the GTS on.

      5. Read the DTCs following the prompts on the GTS screen. Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.

      6. Check the details of the DTCs Click here.

    2. Clear the DTC.


      1. Turn the ignition switch off.

      2. Connect the GTS to the DLC3.

      3. Turn the ignition switch to ON.

      4. Turn the GTS on.

      5. Operate the GTS to clear the codes. Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.

      6. Clear the DTCs by following the prompts on the GTS.

        Tech Tips

        Refer to the GTS operator's manual for further details.