FRONT SHOCK ABSORBER(for 2WD) DISPOSAL

PROCEDURE


  1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH

    Tech Tips

    Use the same procedure for the other front shock absorber.


    1. A01LFH5C01
      *a Approximately 35 mm

      Fully extend the shock absorber piston rod and fix the shock absorber in place at an angle in a vise or similar tool.

    2. Using a drill or similar tool, slowly make a hole approximately 35 mm (1.38 in.) from the top end of the shock absorber and discharge the gas inside of it.

      Note


      • The gas is colorless, odorless and harmless.

      • Since the discharged gas may cause chips to fly off, cover the drill with a cloth when making a hole.