CLEARANCE WARNING BUZZER INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. INSTALL NO. 1 CLEARANCE WARNING BUZZER

    1. Connect the connector.

    2. Attach the clamp to install the No. 1 clearance warning buzzer.

  2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click hereClick here

  3. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY

    Click here

  4. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

  5. INSTALL CONSOLE BOX CARPET

    Click here

  6. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click here

  7. INSTALL INNER NO. 1 INSTRUMENT PANEL BRACKET COVER RH

    Click here

  8. INSTALL INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH

    Click here

  9. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (except Manual Transaxle)

    Click here

  10. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for Manual Transaxle)

    Click here

  11. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY

    Click here

  12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (except Manual Transaxle)

    Click here

  13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

    Click here