FUEL PRESSURE REGULATOR REMOVAL

CAUTION / NOTICE / HINT

Note:

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click hereClick here

PROCEDURE

  1. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP

    Click here

  2. REMOVE NO. 1 FUEL SUB-TANK

    Click here

  3. REMOVE NO. 1 FUEL SUCTION SUPPORT

    Click here

  4. REMOVE FUEL PUMP

    Click here

  5. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY

    1. A237616

      Using a screwdriver with its tip wrapped in protective tape, remove the fuel pressure regulator assembly.

      Note:

      Slowly pull out the fuel pressure regulator assembly because the O-ring is firmly installed between the fuel pressure regulator assembly and fuel filter assembly.

    2. A148186C14

      *1

      O-Ring

      Remove the 2 O-rings from the fuel pressure regulator assembly.