OUTER REAR VIEW MIRROR INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart (Click here).

PROCEDURE

  1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH

    1. Attach the claw to install the outer rear view mirror assembly LH, and then install the 3 bolts.

      5.5 N*m

      56 kgf*cm

      49 in.*lbf

    2. Attach the clamp.

    3. Connect the connector.

  2. INSTALL FRONT DOOR SERVICE HOLE COVER LH

    Click here

  3. INSTALL OUTER MIRROR INSTALL HOLE COVER LH

    Click here

  4. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP LH

    Click here

  5. INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY LH

    Click here

  6. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  7. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

  8. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

  9. INSTALL FRONT DOOR TRIM MOULDING LH

    Click here

  10. INSTALL FRONT DOOR INSIDE HANDLE BEZEL LH

    Click here