CRANKSHAFT POSITION SENSOR INSPECTION

PROCEDURE

  1. INSPECT CRANKSHAFT POSITION SENSOR (w/o Stop And Start System)

    1. A235481C06

      *a

      Component without harness connected

      (Crankshaft Position Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Cold

      1630 to 2740 Ω

      Hot

      2065 to 3225 Ω
      Tip:

      In the table above, the terms "Cold" and "Hot" mean the temperature of the coils themselves. "Cold" is from -10 to 50°C (14 to 122°F) and "Hot" is from 50 to 100°C (122 to 212°F).

      If the result is not as specified, replace the crankshaft position sensor.