CONDENSER(for 1GR-FE) REMOVAL

PROCEDURE

  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. DRAIN ENGINE COOLANT

    (Click here)

  3. REMOVE RADIATOR ASSEMBLY

    (Click here)

  4. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

    1. E255173

      Remove the bolt and disconnect the discharge hose sub-assembly from the cooler condenser assembly.

      Note:

      • When removing the bolt, do not allow any tools to contact the pipe.

      • When removing the bolt, hold a part of the pipe near the connector.

    2. Remove the O-ring from the discharge hose sub- assembly.

      Note:

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  5. DISCONNECT AIR CONDITIONING TUBE ASSEMBLY

    1. E266274

      Remove the bolt and disconnect the air conditioning tube assembly from the cooler condenser assembly.

      Note:

      • When removing the bolts, do not allow any tools to contact the pipe.

      • When removing the bolts, hold a part of the pipe near the connector.

    2. Remove the O-ring from the air conditioning tube assembly.

      Note:

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  6. DISCONNECT NO. 1 COOLER CONDENSER BRACKET

    1. E266273

      Remove the bolt and disconnect the No. 1 cooler condenser bracket.

  7. DISCONNECT NO. 2 COOLER CONDENSER BRACKET

    1. E199360

      Remove the bolt and disconnect the No. 2 cooler condenser bracket.

  8. REMOVE COOLER CONDENSER ASSEMBLY

    1. E204851

      Remove the 3 bolts and cooler condenser assembly as shown in the illustration.

  9. REMOVE COOLER DRYER

    1. I030086

      Using a 14 mm socket hexagon wrench, remove the cap from the modulator.

    2. E050386

      Using pliers, remove the cooler dryer.