BLACK OUT TAPE(for Rear Door) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note:

   • After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click hereClick hereClick here).

   • When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click hereClick hereClick hereClick here).

2. REMOVE REAR DOOR FRONT WINDOW FRAME MOULDING LH

   1. Remove the rear door front window frame moulding (Click here).

3. REMOVE NO. 2 BLACK OUT TAPE LH

   

   Tip:

   When removing the black out tape, heat the vehicle body and black out tape using a heat light.

   Standard

   Item	Temperature
   Vehicle Body	40 to 60°C (104 to 140°F)
   Black Out Tape	20 to 30°C (68 to 86°F)

   Note:

   Do not heat the vehicle body or black out tape excessively.

   1. Pull back an edge of the No. 2 black out tape and pull it parallel to the vehicle body to remove it.

4. REMOVE REAR DOOR LOWER OUTSIDE STRIPE LH

   

   Tip:

   When removing the outside stripe, heat the vehicle body and outside stripe using a heat light.

   Standard

   Item	Temperature
   Vehicle Body	40 to 60°C (104 to 140°F)
   Outside Stripe	20 to 30°C (68 to 86°F)

   Note:

   Do not heat the vehicle body or outside stripe excessively.

   1. Pull back an edge of the rear door lower outside stripe and pull it parallel to the vehicle body to remove it.

5. REMOVE BLACK OUT TAPE LH

   

   Tip:

   When removing the black out tape, heat the vehicle body and black out tape using a heat light.

   Standard

   Item	Temperature
   Vehicle Body	40 to 60°C (104 to 140°F)
   Black Out Tape	20 to 30°C (68 to 86°F)

   Note:

   Do not heat the vehicle body or black out tape excessively.

   1. Pull back an edge of the black out tape and pull it parallel to the vehicle body to remove it.

6. REMOVE REAR DOOR OUTSIDE STRIPE LH

   

   Tip:

   When removing the outside stripe, heat the vehicle body and outside stripe using a heat light.

   Standard

   Item	Temperature
   Vehicle Body	40 to 60°C (104 to 140°F)
   Outside Stripe	20 to 30°C (68 to 86°F)

   Note:

   Do not heat the vehicle body or outside stripe excessively.

   1. Pull back an edge of the rear door outside stripe and pull it parallel to the vehicle body to remove it.