CAMSHAFT OIL CONTROL VALVE INSTALLATION

PROCEDURE

  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side)

    1. A195062E04

      Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.

      Table 1. Text in Illustration

      *1

      New O-Ring
    2. A205035E02

      Install the oil control valve with the bolt.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

      Note:

      • Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).

      • Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.

    3. Connect the oil control valve connector.

  2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side)

    1. A195062E04

      Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.

      Table 2. Text in Illustration

      *1

      New O-Ring
    2. A205036E02

      Install the oil control valve and wire harness bracket with the bolt.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

      Note:

      • Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).

      • Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.

    3. Connect the oil control valve connector.

  3. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here