REAR WIPER MOTOR REMOVAL


  1. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY


    1. B007R8TE01

      Disengage the 3 claws and separate the head cap as shown in the illustration.

    2. Remove the rear wiper arm nut and rear wiper arm and blade assembly.

  2. REMOVE REAR WIPER SHAFT COVER


    1. B007TUN

      Remove the rear wiper shaft cover.

  3. REMOVE REAR NO.1 WIPER LINK PIVOT WASHER


    1. B007U5O

      Using the socket wrench (27 mm), remove the lock nut and rear No.1 wiper link pivot washer.

      Note

      Do not damage the glass.

  4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY UPPER


    1. B007TLRE01

      Detach the 6 clips and remove the upper back door trim board assembly.

    2. Remove the remaining clips on the body, and reinstall them to the upper back door trim board assembly.

  5. REMOVE REAR WIPER MOTOR


    1. B007OF3E01

      Disconnect the connector and remove the clamp.

    2. Remove the 3 bolts and rear wiper motor and grommet as a unit.

    3. B007OY7E01

      Remove the grommet from the rear wiper motor.