AUDIO AND VISUAL SYSTEM (for Radio and Display Type) CD Sound Skips

INSPECTION PROCEDURE

Tech Tips

When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for T-connect.

PROCEDURE


  1. CHECK DISC


    1. A01DWB9

      Check that the disc is not deformed or cracked.

      OK
      No deformation or cracks on the disc

    NG

    CHANGE DISC

    OK

  2. CHECK DISC


    1. A01DZ6Y

      Disc cleaning


      1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

        OK
        Malfunction disappears.

        Note

        Do not use a conventional record cleaner or antistatic preservative.


    NG

    REPLACE DISC WITH ANOTHER AND RECHECK Click here

    OK

    END (DISC IS DIRTY)

  3. REPLACE DISC WITH ANOTHER AND RECHECK


    1. Replace the disc with a known good one and recheck that the malfunction disappears.

      OK
      Malfunction disappears.

    NG

    CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY Click here

    OK

    END (DISC IS DEFECTIVE)

  4. CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY


    1. Check that the radio and display receiver assembly is properly installed Click here.

      OK
      Radio and display receiver assembly is properly installed.

    NG

    REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY PROPERLY Click here

    OK

    REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here