POWER MANAGEMENT CONTROL ECU(for LHD) INSTALLATION

CAUTION / NOTICE / HINT

Tip:

A bolt without a torque specification is shown in the standard bolt chart (Click here).

PROCEDURE

  1. INSTALL POWER MANAGEMENT CONTROL ECU (for Type A)

    1. Install the power management control ECU with the screw.

    2. Connect each connector.

    3. Install the glove compartment door assembly (Click here).

    4. Install the glove compartment door sub-assembly (Click here).

  2. INSTALL POWER MANAGEMENT CONTROL ECU (for Type B, for Type C, for Type D)

    1. Attach the 2 claws to install the power management control ECU to the ECU integration box RH.

      U124089E01
      Table 1. Text in Illustration

      *A

      for Type B

      *B

      for Type C

      *C

      for Type D

      -

      -
    2. U124088E01

      Install the ECU integration box RH with the 2 screws and bolt.

      Table 2. Text in Illustration

      *a

      Screw

      *b

      Bolt

    3. Connect each connector.

    4. Install the lower instrument panel sub-assembly (Click here).

    5. Install the instrument panel safety pad sub-assembly (Click here).

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).