FRONT DOOR SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

   Note:

   Do not touch the cone part of the speaker.

   1. 

      Temporarily install the speaker by attaching the claw of the speaker to the door panel.

   2. Using an air riveter or hand riveter, install the speaker with 3 new rivets.

      Note:

      • 

        Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

        Table 1. Text in Illustration

        *1	INCORRECT
        *2	CORRECT
        *3	Mandrel
        *4	Riveter

      • 

        Confirm that the rivets are seated properly against the speaker.

        Table 2. Text in Illustration

        *1	INCORRECT
        *2	CORRECT
        *3	Riveter

      • Do not tilt the riveter when installing the rivet to the speaker.

      • Do not leave any space between the rivet head and speaker.

      • 

        Do not leave any space between the speaker and door. Firmly hold together the 2 items while installing the rivet.

        Table 3. Text in Illustration

        *1	INCORRECT
        *2	CORRECT
        *3	Riveter

   3. Connect the connector.

2. INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY LH

   Click here

3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

   Click here

4. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

   Click here

5. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL

   Click here

6. INSTALL FRONT DOOR TRIM MOULDING LH

   Click here

7. INSTALL FRONT DOOR INSIDE HANDLE BEZEL LH

   Click here

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).