REAR BRAKE FLEXIBLE HOSE INSTALLATION

CAUTION / NOTICE / HINT

Tip:
  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. INSTALL NO. 5 FLEXIBLE HOSE BRACKET

    1. Install the bracket with the bolt.

      29 N*m

      296 kgf*cm

      21 ft.*lbf

      Note:

      Make sure the bracket rotation stopper touches the installation position.

  2. INSTALL NO. 6 FLEXIBLE HOSE BRACKET

    1. Install the bracket with the bolt.

      29 N*m

      296 kgf*cm

      21 ft.*lbf

      Note:

      Make sure the bracket rotation stopper touches the installation position.

  3. INSTALL REAR FLEXIBLE HOSE

    1. Connect the rear flexible hose to the connecting point with each brake tube, and then install 2 new clips.

    2. Using a union nut wrench, connect each brake tube to the rear flexible hose while holding the rear flexible hose with a wrench.

      15 N*m

      155 kgf*cm

      11 ft.*lbf

      Note:
      • Do not bend or damage the brake tube.

      • Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.

      • Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (Click hereClick hereClick here).

    3. Connect the flexible hose to the connecting point with each brake tube, and then install 2 new clips.

    4. Using a union nut wrench, connect each brake tube to the flexible hose while holding the flexible hose with a wrench.

      15 N*m

      155 kgf*cm

      11 ft.*lbf

      Note:
      • Do not bend or damage the brake tube.

      • Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.

      • Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (Click hereClick hereClick here).

  4. INSTALL REAR FLEXIBLE HOSE LH

    1. Connect the rear flexible hose to the connecting point with the brake tube, and then install a new clip.

    2. Using a union nut wrench, connect the brake tube to the rear flexible hose while holding the rear flexible hose with a wrench.

      15 N*m

      155 kgf*cm

      11 ft.*lbf

      Note:
      • Do not bend or damage the brake tube.

      • Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.

      • Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (Click hereClick hereClick here).

    3. Install the rear flexible hose and a new gasket to the rear disc brake cylinder with the union bolt.

      31 N*m

      316 kgf*cm

      23 ft.*lbf

      Tip:

      Install the rear flexible hose lock securely to the lock hole in the cylinder.

  5. BLEED BRAKE LINE

  6. INSTALL REAR WHEEL