REAR SEAT CUSHION HEATER(for RH Side) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seatback frame, seat cushion frame and reclining adjuster may injure your hands.

PROCEDURE

  1. INSTALL REAR SEAT CUSHION HEATER ASSEMBLY RH

    1. B429048

      Using a tacker, install the rear seat cushion heater assembly RH with 12 new tack pins as shown in the illustration.

      Tip:

      • Secure the rear seat cushion heater assembly RH so that it does not bend or stretch.

      • Set the rear seat cushion heater assembly RH so that the nichrome wire is on the separate type rear seat cushion cover side.

  2. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER

    Click hereClick here

  3. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD

    Click hereClick here

  4. INSTALL REAR SEAT NO. 2 CUSHION HINGE COVER

    Click hereClick here

  5. INSTALL REAR SEAT NO. 1 CUSHION HINGE COVER

    Click hereClick here

  6. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH

    Click hereClick here

  7. INSTALL REAR SEAT COVER CAP RH

    Click hereClick here

  8. INSTALL REAR SEAT ASSEMBLY RH

    Click here