CRANKSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

  1. INSTALL CRANKSHAFT POSITION SENSOR

    1. A326005C01

      *a

      O-ring

      Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.

      Note:

      If reusing the crankshaft position sensor, be sure to inspect the O-ring.

    2. Install the crankshaft position sensor to the timing chain cover sub-assembly with the bolt.

      7.5 N*m

      76 kgf*cm

      66 in.*lbf

      Note:

      • If the crankshaft position sensor has been struck or dropped, replace it.

      • Make sure that the O-ring is not cracked or does not move out of place during installation.

    3. Connect the crankshaft position sensor connector.

  2. INSPECT FOR OIL LEAK

    Click here