2ZR-FAE ENGINE CONTROL TORQUE SPECIFICATIONS
Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
|---|---|---|---|
Camshaft timing oil control valve assembly x Cylinder head cover sub-assembly |
10 |
102 |
7 |
Continuously variable valve lift controller x Cylinder head |
18 |
184 |
13 |
Air tube x Cylinder head cover |
10 |
102 |
7 |
Ignition coil assembly x Cylinder head cover |
10 |
102 |
7 |
Throttle body assembly x Intake manifold |
10 |
102 |
7 |
ECM x Bracket |
3.0 |
31 |
27 in.*lbf |
ECM x Body |
8.0 |
82 |
71 in.*lbf |
No. 2 air cleaner inlet x Body |
7.0 |
71 |
62 in.*lbf |
Accelerator pedal rod x Body |
5.4 |
55 |
48 in.*lbf |
Mass air flow meter x Air cleaner cap |
1.4 |
14 |
12 in.*lbf |
Camshaft position sensor x Cylinder head cover |
10 |
102 |
7 |
Crankshaft position sensor x Cylinder block |
10 |
102 |
7 |
Spark plug x Cylinder head |
20 |
204 |
15 |
Engine coolant temperature sensor x Cylinder head |
20 |
204 |
15 |
Engine oil temperature sensor x Timing chain cover sub-assembly |
20 |
200 |
14 |
Knock sensor x Cylinder block |
21 |
214 |
15 |
Vacuum sensor assembly x Bracket |
10 |
102 |
7 |
Air fuel ratio sensor x Exhaust manifold |
40 (44) |
408 (449) |
30 (32) |
Heated oxygen sensor x Front exhaust pipe |
40 (44) |
408 (449) |
30 (32) |
Air cleaner case x Body |
7.0 |
71 |
62 in.*lbf |
Wire harness x Cylinder head cover for Bolt A |
8.4 |
86 |
74 in.*lbf |
Wire harness x Cylinder head cover for Bolt B |
10 |
102 |
7 |
Wire harness x Cylinder head |
8.4 |
86 |
74 in.*lbf |
( ): For use without SST