ACCELERATOR PEDAL INSTALLATION

PROCEDURE

  1. INSTALL ACCELERATOR PEDAL ROD

    Note:

    • This accelerator pedal does not require lubrication.

      Do not apply oil or other lubrication to the accelerator pedal rod.

      If applied, the accelerator pedal rod must be replaced.

    • Avoid physical shocks to the accelerator pedal rod.

    • Do not disassemble the accelerator pedal rod.

    1. A212596E02

      Install the accelerator pedal rod with the 2 bolts.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

    2. Connect the accelerator pedal position sensor connector.