MIRROR HEATER RELAY ON-VEHICLE INSPECTION


  1. REMOVE MIRROR HEATER RELAY

    A01DVNZE20

    1. Remove the mirror heater relay from the relay block No. 3.

  2. INSPECT MIRROR HEATER RELAY


    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω
      Battery voltage not applied to terminals 1 and 2 10 kΩ or higher

      If the result is not as specified, replace the mirror heater relay.

  3. INSTALL MIRROR HEATER RELAY


    1. Install the mirror heater relay to the relay block No. 3.