REAR SUSPENSION SYSTEM


  1. CONSTRUCTION


    1. A low-pressure (N2) gas sealed rear shock absorber assembly is used.

    2. The rear shock absorber assembly achieves superior maneuverability, stability and ride comfort due to the optimized damping force.

    3. Internal friction has been reduced, thus allowing the absorber rod to move smoothly.

      A01R2DHC01
      *1 Oil Seal *2 Absorber Rod
      *3 Multi-leaf Type Linear Control Valve *4 Base Valve
      *5 Oil *6

      Low-pressure (N2) Gas
      *7 Rod Guide Bush - -
      *a Bush Cross Section - -