FRONT BUMPER INSTALLATION

CAUTION / NOTICE / HINT

Tip:

A bolt without a torque specification is shown in the standard bolt chart (Click here).

PROCEDURE

INSTALL FRONT WHEEL OPENING EXTENSION PAD LH
1. Install the front wheel opening extension pad LH with the 3 screws.
INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

Tip:
Use the same procedure described for the LH side.
INSTALL FRONT BUMPER SIDE RETAINER LH
1. Attach the 2 claws to install the front bumper side retainer LH.
2. Install the screw and bolt.
INSTALL FRONT BUMPER SIDE RETAINER RH

Tip:
Use the same procedure described for the LH side.
INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
1. Install the front bumper reinforcement sub-assembly with the 8 bolts.
  
  50 N*m
  
  510 kgf*cm
  
  37 ft.*lbf
2. Attach the 4 clamps.
INSTALL FRONT BUMPER ENERGY ABSORBER
1. Install the front bumper energy absorber.

INSTALL FRONT BUMPER COVER

Install the front bumper cover.
1. w/ Headlight Cleaner System:
  Connect the headlight cleaner hose.
2. Connect the 2 fog light connectors.
3. w/ TOYOTA Parking Assist-sensor System:
  Connect the No. 4 engine room wire connector.
4. Attach the 6 claws to install the front bumper cover.
Install the bolt and 2 clips.

Install the pin hold clip.

Note:

Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

Tip:

Use the same procedure for the RH and LH sides.

Table 1. Text in Illustration
*a	CORRECT
*b	INCORRECT

Install the screw.

Tip:
Use the same procedure for the RH and LH sides.

INSTALL FRONT SPOILER COVER RH

Click here
INSTALL FRONT SPOILER COVER LH

Click here
INSTALL FRONT SPOILER SIDE PROTECTOR RH

Click here
INSTALL FRONT SPOILER SIDE PROTECTOR LH

Click here
INSTALL RADIATOR GRILLE PROTECTOR
1. Install the 2 radiator grille protectors.
INSTALL RADIATOR SUPPORT OPENING COVER

Click here
ADJUST FOG LIGHT ASSEMBLY

(Click here)