HEADLIGHT ASSEMBLY(for HID Headlight) REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click hereClick hereClick here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick hereClick here

  3. REMOVE FRONT BUMPER COVER

    Click hereClick here

  4. REMOVE HEADLIGHT ASSEMBLY LH

    E268969C03

    *1

    Protective Tape

    *2

    Bolt

    *3

    Screw

    1. Put protective tape around the headlight assembly LH.

    2. Remove the bolt and 3 screws.

    3. Disconnect each connector to remove the headlight assembly LH.