FRONT LOWER SUSPENSION ARM REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • The procedure listed below is for the LH side.

  • Use the same procedure for the RH side and LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL

  2. REMOVE REAR ENGINE UNDER COVER LH


    1. A004HPF

      Remove the 3 clips and rear engine under cover LH.

  3. REMOVE LOWER ARM SUPPORT PLATE


    1. A004KXI

      Remove the bolt, nut and lower arm support plate.

  4. SEPARATE TIE ROD END SUB-ASSEMBLY LH

    Click here

  5. SEPARATE STEERING KNUCKLE LH

    Click here

  6. REMOVE FRONT LOWER SUSPENSION ARM ASSEMBLY LH


    1. A004IH9

      Remove the bolt, nut and front lower suspension arm assembly LH from the front cross member sub-assembly.

  7. REMOVE FRONT LOWER SUSPENSION ARM BOLT


    1. A004JREE02

      Using SST, remove the front lower suspension arm bolt.

      SST
      09726-18010