RADIO RECEIVER INSTALLATION

PROCEDURE

  1. INSTALL NO. 2 RADIO BRACKET

    1. Install the bracket with the 3 screws.

      3.0 N*m

      31 kgf*cm

      27 in.*lbf

  2. INSTALL NO. 1 RADIO BRACKET

    1. Install the bracket with the 3 screws.

      3.0 N*m

      31 kgf*cm

      27 in.*lbf

  3. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/ Navigation System)

    1. Attach the 2 claws to install the lower center instrument cluster finish panel.

    2. Install the 4 screws.

  4. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET

    1. w/o Navigation System:

      1. Connect the connectors.

      2. B249065

        Insert the radio receiver to attach the 6 clips and rib on its backside.

        Note:

        When inserting the radio receiver, do not press the knobs on it.

      3. Install the radio receiver with the 4 bolts.

        13 N*m

        127 kgf*cm

        9 ft.*lbf

    2. w/ Navigation System:

      1. Connect the connectors.

      2. B249064

        Insert the radio receiver to attach the 6 clips and 3 ribs on its backside.

        Note:

        When inserting the radio receiver, do not press the knobs on it.

      3. Install the radio receiver with the 4 bolts.

        13 N*m

        127 kgf*cm

        9 ft.*lbf

  5. INSTALL FRONT CONSOLE UPPER PANEL GARNISH

    Click here

  6. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).