TRANSMITTER BATTERY(w/o Entry and Start System) REPLACEMENT

PROCEDURE

1. REMOVE TRANSMITTER BATTERY

   Note:

   Take extra care when handling these precision electronic components.

   1. 

      *a	Protective Tape

      Insert a precision screwdriver into the gap, and turn the screwdriver to remove the transmitter housing cover.

      Tip:

      Tape the screwdriver tip before use.

   2. 

      *a

      Push

      Remove the transmitter battery as shown in the illustration.

      Note:

      • Do not push the terminals with your finger.

      • Do not touch the transmitter battery with wet hands. Moisture may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

2. INSTALL TRANSMITTER BATTERY

   1. 

      Install a new transmitter battery with the positive (+) side facing upward, as shown in the illustration.

      Note:

      • Do not bend the transmitter battery electrode during insertion.

      • Keep the inside of the transmitter housing cover free of dust and oil.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

   2. 

      Install the transmitter housing cover by pressing down on it as shown in the illustration.