FRONT BUMPER REMOVAL

PROCEDURE


  1. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A005E5Q

      Remove the 3 clips.

    2. Disengage the 3 guides and remove the radiator support opening cover.

  2. REMOVE FRONT BUMPER ASSEMBLY


    1. A005EZ3

      Apply protective tape around the front bumper assembly as shown in the illustration.

      Text in Illustration
      A005CWR Protective Tape
    2. A005CQN

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    3. A005B6K

      Remove the 6 screws.

    4. A005CUL

      Using a clip remover, remove the 3 clips.

    5. Remove the 4 bolts.

    6. A005E3O

      Disengage the 2 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. Disconnect each connector.

    8. A005CFV

      Remove the front bumper assembly as shown in the illustration.